It’s convenient that the last Tuesday of the month also happens to be the last day of the month so that this post falls on it’s usual day. I hope everyone had a happy holiday season and have fun and exciting plans for the new year.
As I did last year, I’m not going to do a big yearly retrospective and look forward. I’m going to keep this to the typical monthly perspective and save the year-long views for the anniversary post in May.
Looking Back
In November I predicted that December would be pretty hectic. It turned out to be even crazier that I expected. So much so that a few of my posts didn’t quite get up on time to be posted at their usual 8am Mountain Time schedule. I still managed to get them up on Tuesdays, but some were a little later in the day. I don’t know if anyone other than me even noticed.
The craziness also spilled over into my timeline posts on Twitter. There were a few days right around Christmas that I was just never really near a computer and I got way behind on making the posts. Next year I’ll have to remember the schedule those posts in advance instead of doing it the day of. Part of the problem there was that I had a block of days that I actually hadn’t made entries for yet and so not only did I have to post. I also had to create the entries as well. I’ve gotten a bit behind in that and need to take a day and get the next few months of the timeline sorted out. In getting caught up I found I missed a few entries for one of the threads so the summary post next week will actually contain a few entries that never went out on Twitter.
I finished up the UPF Assault Carrier this month although like everything else it took a bit longer than I expected. I had planned on it being the second post of the month but it ended up being the fourth.
In the meantime I posted another organization, Obar Enterprises, that I use in my games. This is a follow-on post like the Streel post I did a while back.
I also tried something new in the third post of the month by recording the prologue to my novel Discovery as an audiobook to play around with that format a bit. I got a really helpful review from someone on Facebook that gave me some ideas going forward. I had fun doing this so I’ll probably record more of the book in the future, especially if people would like to hear the rest.
Last month I mentioned that there were be a bunch of behind the scenes technical stuff going on with the websites that I’m hosting. I started that process this month moving this site and a couple of my smaller, low-traffic sites from my web hosting provider that I’m not completely happy with to my new server. Progress on this suffered due to the holiday activities but I was able to move one of each of the different types of sites I host (WordPress, Drupal, basic HTML) over to the new server so moving the remaining sites should go fairly smoothly. One of the advantages of moving is that these new versions of the sites will have HTTPS enabled instead of just HTTP.
The other behind the scenes effort that was going on was working on the next issue of the Frontier Explorer. I started strong but then fell behind due to the holidays so I’ll have to put in a bit of effort this next week to get caught up. With any luck, we’ll have the issue out by mid January.
Looking Forward
So what’s coming up in January? We’ll start next week with the usual Detailed Frontier Timeline post. The following week will be a post on the Sathar Assault Carrier. I started and finished that model on the 26th so it’s ready to go, I just need to write it up. I don’t know what the third post will be but I’ll likely do the write-up on another corporation. And we’ll end the month with the State of the Frontier post.
It is also possible that the third post may also be on a completely different topic. I’ve volunteered to host a month of the RPG Blog Carnival this year and while I don’t know what month I’m hosting, I’m going to make an effort to participate more in the topics of other hosts. My main issue in the past has been that a lot of topics have been either areas I don’t usually dabble in, or they’ve been topics completely unrelated to sci-fi games. I’ll by trying harder this year to twist the topics to sci-fi so we’ll see where that goes.
Along the way, I’ll be putting out another issue of the Frontier Explorer as I had just mentioned above. We release the Winter issue each January so that will be a prime focus this month.
I also plan on moving all of the remaining sites off of my remote hosting provider. I have four left, including my personal site, the Frontier Explorer site, and my New Frontier Games site. The fourth is a personal site for one of my sons. Once those are done, I’ll just have a few sites to migrate from my old server to the new one, although some of those will take some work and that probably won’t start until February. Or at least until this month’s Frontier Explorer issue is done and out the door.
Finally I’ve also started working on a UPF Minelayer miniature. This one is going to look a lot like the official Sathar Cutter miniature since that’s the silhouette on the game counter but it will have the stylings of the other UPF ships rather than the sathar stylings. Once that is done, I’ll have miniatures for all of the standard UPF and Sathar ships. From there I have a few more of the original miniatures to reproduce and then I’ll going to start on some new ships. I’ll probably finish the minelayer model this month but it may not be written up until February.
That’s it for now. Keep gaming and have a happy new year!
Unsurprisingly, December has been kind of hectic and I didn’t get as much time to work on this miniature as I had hoped earlier in the month but I managed to finish it in time for Christmas.
This is a model for which there is no original miniature so this one comes completely out of my imagination. Well, almost completely. Like the others I’ve created from scratch, we at least had the silhouette from the counter. Now this shop deviates significantly from the cylindrical shape of the the other capital ships in the UPF roster and actually looks a bit more like the UPF assault scout. It’s also radically different from the silhouette given in the UPF Campaign book that I’ll use for a different version. In any case, this was the basis I used for the model.
Building the Model
The first thing I needed to do was figure out a scale. According to the rules, the Assault Carrier is supposed to be hull size 16-18. This makes it a bit bigger than the light cruiser but smaller than or on par with the heavy cruiser. We’ll see how well I did with that later but based on the size of those models, I picked a scale and got started.
The first order of business was to get the basic body shape down. I knew that I didn’t what to make it as thick as it was wide since that would make it very, very massive. So while I matched the silhouette, I made the fuselage flattened rather than as thick as it was wide. I didn’t have any good idea what that circle on the silhouette was supposed to be so I just left it off. I suppose it could be a really big dome but it was right where I wanted to put the fighter hangars so I ignored it.
I again reused the standard UPF class C engine that I’ve used on all the other capital ships That makes it differ somewhat what from the silhouette as they are longer than depicted but that’s not really a big deal. The gun batteries at the nose are also a bit bigger than depicted on the counter.
With the basic shape done, it was time to add surface detail. The first thing I did was add in hangar bays for the fighters. Since an assault carrier can hold 8-12 fighters, I decided that this one would have 12 bays. There are three on each “face” of the fuselage. They are the three rectangular structures sticking out toward the back (thicker) part of the ship. Each one represents a bay for a single fighter.
After that it was just a matter of adding details to give it some character like the other ships. I turned out that there was a lot of surface to cover on this model, more than on the others. I reused some of the surface detail structures from the other models and created a few new ones for this model. I’m starting to build up quite a collection of objects.
The angled surfaces of this model provided some interesting opportunities to play with the relative rotation of the details having some parallel to the surface and other (like the hangars) not rotated to be at the same angle. For each face of the model, I composed all the surface features on a flat, vertical plane an then rotated it to be flush with the surface of the ship. This make positioning everything much easier.
When adding in all the detail, I struggled between how much regularity to include (e.g. identical, regularly spaced features) versus applying a bit of randomness. You can be the judge of whether I hit a good balance or not.
All told this model took about 8 hours of works spread out over a month of time, often in 15-20 minute increments here and there when I could find the time.
Printing
This post would have been up a bit sooner but there were some issues in getting the model printed. Well, printing was straightforward, but getting the final model rendered ran into some problems.
There is a lot of detail on the model and in the end, my laptop that I do the modeling on was unable to do the final render to the printable file at the high detail level I wanted. It kept crashing due to running out of memory. In the end I had to render it on my big computer (which I’ll probably do as a matter of course from now on as it has more memory and a faster CPU). And even then there was a weird problem in the rendering that I had to figure out. Since it took 2.75 hours to render, even on the big computer, that was not a fast process.
From this I’ve learned that I need to start being more selective and assign rendering detail at the individual element level instead of globally. The issue is really on the round pieces as you get lots of vertices in those parts that really are needed on the small parts but if you don’t have it on the larger pieces, you notice the individual faces. I’ve been setting the detail level high so the big pieces (the lobes and weapons balls in this model) look good but that’s been serious overkill on all the small parts. In the end, the raw model file for this ship was 381 MB. The next largest ones were the space station at 239MB and the battleship at 215MB. So that’s something I’ll be looking into on future models.
I finished the model Sunday afternoon and thought I’d have a print by Monday morning but all the rendering problems resulted in me not getting the print started until late Monday afternoon. It takes twelve hours to print so it just finished this morning. But it printed and it looks great. Here’s a picture of the side not shown in the model image above. It still has the printing supports on it as it’s not done curing yet. They will all get removed once that is done.
I was very happy to see out it turned out. The details in the model image looked a bit over powering, maybe because of the color scheme the software uses. But printed, they looked just right.
Earlier I mentioned that we’d check in on how I did on picking the scale. Here’s a picture comparing the assault carrier with the battleship (left) and heavy cruiser (right). I probably should have included the light cruiser as well but didn’t. This image shows the side of the assault carrier that was in the model image.
The assault carrier should have roughly the same volume as the heavy cruiser. It’s shorter but much fatter. And going by the volume of resin needed, more than double the size. So on an empirical basis, I probably made it a bit too big but I actually think it looks just about right aesthetically. So I’m happy with it as it is. However, it’s way too wide to use as a chess piece if I do make a chess set with the ships so I’ll have to think about that.
Coming Up
I’ll get the model posted up on DriveThruRPG in the coming week (and updated this post with a link) as well as getting it added to my Miniature Price List page.
This finishes all the UPF models except for a new minelayer. I’m holding off on that one as you can use the sathar cutter miniature in a pinch since that one matches the silhouette of the counter in the game. I’ll revisit that model soon but next up is the Sathar Assault Carrier.
A year and a half ago when I started this blog, the Sathar Assault Carrier was one of my original projects that I’ve managed to not spend any time on. This will not be that version of the assault carrier as I wanted to create a full set of deck plans and a model that matches them like I did for the sathar destroyer. That’s a very large project. This version of the miniature will be created just as I’ve done with the UPF Heavy Cruiser and Assault Carrier – using the counter silhouette to give its shape and adding surface details based on the existing miniatures. The sathar ships are less cluttered so this should go faster.
What do you think of the UPF Assault Carrier? Let me know in the comments below.
I haven’t finished the UPF Assault Carrier yet as this week has been pretty crazy. It’s close, but not quite done. I still want you have a post this week so we’re going to try something new. This post would have gone up earlier today but I ran into some technical issues that I had to work around in getting this post up. This will be a fairly short post.
I’ve been thinking about making an audio book out of my Discovery novel. Not so much because anyone is clamoring for one but because I want to play around with the format and gain some more experience in recording and audio editing.
To that end, I sat down, busted out my Blue Yeti microphone, fired up Audacity, and recorded the prologue to the book. That took about 15-20 minutes. Then I sat down and started editing. That took a bit over an hour. Maybe close to an hour and a half. I wasn’t actually paying that close attention. Partially because I needed to fix things, and partially as I had to remember how to get around in Audacity.
I learned quite a bit even from this short exercise which I’ll discuss a bit below. Some I expected and others I should have expected, but none of them were real surprises.
In any case, here’s my first cut at this, a 12 minute clip of the prologue. Enjoy and let me know what you think.
My Takeaways
Here are some of the things I learned while working on this initial part of this project.
I need to breath quieter. Most of it has been edited out and there were definitely parts where you couldn’t hear my breaths but I still needed to edit out quite a few, especially in the long pauses. And I’m sure there are a few I missed.
I need to work on my tonal inflections a bit more. This wasn’t bad for a fairly cold read. I had read over the prologue once before I started reading, and I’m the one who wrote it, but I probably could have put some more time in to thinking about exactly how I wanted certain passages to sound.
I should practice a few different voices. I put some variation into the voices of different characters but not a lot. That is definitely not my skill area.
Don’t be afraid of retakes. There were several passages that I completely flubbed. I just paused and started over. These were super easy to remove in editing and I shouldn’t be afraid to reread anything for a second or third take. I should also be willing to go back and redo sections that I notice while editing. I didn’t do that this time so you might have caught them. There was even one section where I used the first few words from the first take and the rest from the second take since I liked the intonation better for the beginning of the sentence in the first one.
This doesn’t go fast. I had originally thought it would take about half an hour to edit the clip but it ended up taking over twice as long. I’m sure it will go faster as I get more experience both in making fewer mistakes that have to be edited and in editing more efficiently. But I still need to budget a sizeable chunk of time to this.
I need to learn how to use Audacity (or some other tool) more effectively. It has all kinds of bells and whistles but I only know how to do very basic stuff with it. That might be able to help speed up the editing process.
I’m definitely going to keep working on this. I don’t know how often I’ll actually do the recording or how often (if at all) I’ll post segments here, but it will be a fun project to pursue.
Your Thoughts
I’d be very interested in hearing your feedback. Did it read too slow? To fast? What audio issues did you pick up on? Do you have suggestions on improvements? How does my voice sound?
That last one is definitely one I’m not qualified to judge on. As everyone knows, your voice sounds much different to you when you hear a recording as opposed to when you’re speaking. That’s due to some of the sound you hear while speaking is from vibrations transmitted through your head and skull to the ears which isn’t present in the recording. I’ve gotten used to the sound of my recorded voice, but I’m still not a judge of whether it is pleasant to listen to. My wife likes it, but she’s biased. What do you think?
In any case, I hope you enjoyed it. If you’d like to have me post more segments regularly, let me know.
I don’t have the UPF Assault Carrier done yet so this week you’ll be getting a new organization you can use in your game.
Those of you who follow along with the Detailed Frontier Timeline, either on the monthly posts here on the site or via the @StarFrontiers Twitter feed, may have noticed the introduction of a new organization into the timeline: Obar Enterprises. Anyone that has played in my online games in the last few years has also probably run into, or worked for, Obar Enterprises. And anyone that participates on any of the old online Star Frontiers forums might recognize the name since my handle on those forums is Terl Obar, the name of one of my early Star Frontiers characters and one of the founders of the company.
Obar Enterprises in My Games Today
The following description is the basis I use when players
encounter Obar Enterprises in game, whether just in passing or as
employees. This is not how the
characters were originally created, as that involves the module adventures and
the PCs might run through those. The section
at the end of this post, entitled “The Real Story”, tells how they were created
and advanced in real life.
Background
The company is owned by two couples: Terl and Yala Obar and
Leelab and Reesta Lar. Terl and Yala are
yazirians while the Lars are dralasites.
It’s an unlikely pairing given their races, but they form a tight group.
Terl and Leelab, or Lee as he typically goes by, originally
met years ago when they were hired as troubleshooters for the Cassidine
Development Corporation (CDC). Terl was
a medic with psycho-social skills and Lee was a weapons expert. Lee would often joke that he “took ‘em apart
and Terl put ‘em back together.” Despite
the general prejudices of their races, the two hit it off and were often
assigned on the same team. Over time, Reesta
became part of their core team bringing environmental skills and Yala joined as
a technician and computer expert. Others
came and went from the team to fill in needed skills but the four of them
formed the core.
Over time romance blossomed and the two couples were
married. While this could have
potentially been an issue, CDC was willing to bend the rules due to the
effectiveness of the team. Had their
performance dropped, they might have been split up, but since their performance
stayed high, and even possibly improved, they had no problem staying together
as a unit.
CDC, especially after very successful missions, allows its
employees to purchase stock in the company.
The four took advantage of that to greater or lesser extents over their
time with the company. CDC has done well
over the years and this allowed the Obars and Lars to build up a very sizable
nest egg. After many years with CDC, the
four decided that they were ready for something else. They had made many contacts over the years
and decided it was time to work for themselves.
While at CDC they had picked up starship skills: Yala was a capable Pilot, Lee an Energy Weapons
gunner, Terl had picked up the Rocket gunnery skill, and Reesta had picked up a
lot of computers over the years and had become a passable Astrogator. They lacked an engineer but figured they
could hire one.
Cashing out a small portion of their CDC stock, combined with
a sizable chunk of their savings, they were able to purchase an old, used hull
size 7 tramp freighter, the TSS Searcher, and get it up and running. Hiring a pair of engineers, they started
hauling freight primarily between Dramune, Cassidine, and Prenglar with the
occasional run out to Truane’s Star as well.
They organized their new endeavor under the name Obar Enterprises,
Leelab and Reesta not wanting to put their name on it.
After about a year, they decided to take a gamble and chart
a route through the Xagyg nebula from Cassidine to Truane’s Star cutting the
travel time between those two systems down from three weeks to just one. This would allow them to move desired
commodities between those two systems quickly and turn a tidier profit. With that in mind, they loaded up the Searcher
with a cargo at Triad, made sure the main and backup life support were topped
off, and picked up several extra jumps’ worth of fuel, just in case things went
wrong. Ready to go they set off on this
new adventure.
Luckily, nothing went wrong and they safely arrived in the
Truane’s Star system. Similarly, the return
jump to Cassidine went off without a hitch.
With the new jump fully charted, they decided to keep the route as a “company
secret” figuring they could make more money having the private jump route than
they could from reporting the route to the UPF.
This turned out to be the case and they made a sizable profit over the
years before someone else charted the route and reported it, making it a
standard route on the UPF maps.
Not long after the new route was charted, Reesta decided
that the merchant life was not for her. They
had had several close calls with pirates over the years and especially since
they had struck out on their own and she wanted to do something about
that. She also missed the more structured
life working for CDC but, not wanting to go back there, decided to use her starship
skills to secure a commission as part of Spacefleet and help fight the pirate problem
directly. She retained her partial
ownership in Obar Enterprises but left the day to day operations to enroll in
Gollwin Academy. Given her existing
experience, she was fast-tracked through the program graduating in only a year.
In the intervening years, Terl, Yala, and Lee have continued
to grow Obar Enterprises as Reesta has begun working her way up through the ranks
of Starfleet. While still primarily a
freight company, having expanded their ship roster to include several freighters
and escort ships, they have also diversified some of their endeavors to include
mining operations and, drawing on their experiences at CDC, some for-hire
troubleshooting teams. It’s also rumored
that they have an exploration branch that is cataloging the unexplored systems
in the Frontier but there is no public mention of this portion of their business. Reesta currently commands an assault scout as
part of Task Force Cassidine.
Current Activities
Terl, Yala, and Lee still typically make the run between Cassidine and Truane’s Star, although now in their company’s flagship, mobile headquarters, and their home, the TSSS Morning Glory, hull size 20 freighter. In addition to their freight hauling activities, they have a couple of mining operations on Pale and New Pale in the Truane’s Star system, as well as one on Rupert’s Hole in the Cassidine system.
From their time at CDC, they still have many contacts in
that corporation as well as contacts in Spacefleet (through Reesta) and in the
Pale government on Truane’s Star. They
will often contract with those organizations to do specific jobs that those
organizations don’t want to be associated with directly or don’t have the
manpower to pursue. As part of this
portion of their business, Obar Enterprises maintains a small band of
troubleshooters that they can assign out to various missions and assignments
much like a small mercenary company.
The rumored exploration activity is also a reality although it
is not something they talk about. OE has
purchased a Moraes class exploration vessel and have a crew exploring all the
systems between Truane’s Star and Scree Fron.
As part of this they have discovered a habitable, although uninhabited
world, that they are working on a plan to develop and colonize. The TSS Searcher often disappears from the
Frontier for weeks at a time to deliver supplies to this system. All of this is a secret company project.
Current Resources
Ships
Obar Enterprises has a number of ships operating around the
Frontier. In addition to the Morning
Glory, they still have the TSS Searcher in operation, along with a hull size 6
Pacific class freighter, the TSSS Dark Rose.
They operate two Stiletto-class assault scouts, the OESS Courage and
OESS Excalibur, that typically serve as escorts for the Morning Glory.
For their troubleshooting teams, they developed a small, hull sized 2 spacecraft. The prototype, the TSSS Dart (StarFrontiersman issue 11) has now been in operation for about 3 years. They currently have three of these ships commissioned, the Dart, Bolt, and Quarrel, with a fourth, the Flechette, scheduled to be built in the future.
Their exploration ship is registered as a yacht, the OESS Enterprise.
In addition to the ships above, they have another hull size
20 freighter currently under construction in the Triad starship construction
center. The OESS Dusk’s Radiance will be
Lee’s primary ship when it is completed in the next year.
Installations
To support their shipping operations, Obar Enterprises
maintains offices on the major stations in Truane’s Star, Dixon’s Star,
Cassidine, Prenglar, Dramune, and Fromeltar.
Being a registered corporation on Pale, they also have an office in
Point True but it is minimally staffed as their true headquarters is onboard
the Morning Glory.
As mentioned above, they have mining operations on Pale, New
Pale, and Rupert’s hole. Additionally,
they have a mine on an asteroid somewhere in the Truane’s Star system and it’s
rumored they have a compound on Laco in the Dixon’s Star system. There are also rumors of another complex built
into an asteroid in the Cassidine system but nothing is know about that complex
if it exists (GM Note: it does, but it’s in the Truane’s Star System, not Cassidine,
and it’s different than the mine).
Finally, they have a small science installation on the
surface of a planet in the FS42 system and are in the process of constructing a
small station in orbit around that planet.
Responses
Obar Enterprises is a fairly typical small business but has
very deep pockets when it comes to resource acquisition. The nest egg from their time at CDC is very
large although they don’t really need to tap into it for regular operations due
to successful business over the years and careful resource management.
The Obars and Lars don’t need to work. They have so much money that they could retire
and live extravagantly at any time. They
work because they want to and endeavor to make sure that their employees are
well taken care off. Because of this,
their employees are quite loyal.
Individually and as a company they are much more willing than
would be expected to take on risky or adventurous endeavors just for the excitement
of it. Since money isn’t an issue, a material
loss is not a major setback. On the flip
side, they don’t hold back when defending their own and will bring all
available resources to bear on any threat to their assets and especially to
their people.
Overall, Obar Enterprises is a friendly, upright
organization but are willing to take on risk and expend resources to achieve
their goals. They will not start a fight
but if one breaks out, they will end it as quickly and overwhelmingly in their
favor as possible. I’ll probably go into
more detail about Terl, Yala, Lee, and Reesta themselves in a future post.
Plot Hooks
PCs might interact with Obar Enterprises in a number of ways
if you include the company in your game.
These include, but are definitely not limited to:
Employment – As former adventurer’s
themselves, they look for those type of beings to fill the ranks of their workforce,
especially their troubleshooter/mercenary division. The PCs could be hired as a troubleshooter
team for the company and assigned missions for the company or contracted out to
other organizations. Or they could be recruited
in the exploration division. They will
have fairly wide latitude in how they proceed.
They will be given objectives, not processes.
Competition – Maybe the PCs will be going
after the same cargo, target, or other objective as a team from OE. They’ll have to use ingenuity and resourcefulness
to win out as the OE team will be well funded and equipped.
Collaboration – Maybe the PCs work for an
organization that has contracted OE for help and some number of NPCs from OE
will be working with them.
These interactions could occur in any of the areas where
Obar Enterprises have interests or activities.
The Real Story
So that’s Obar Enterprises as I currently use them in my
games. If we were playing D&D, the
company would probably be considered Neutral Good. They want the Frontier to be a better place
and follow the rules when possible but are not afraid to color outside the
lines when that gets better results.
While the history given works in a generic campaign, that isn’t how the characters got to where they are. Terl, Yala, Lee, and Reesta were some of my earliest characters when I first started running and playing Star Frontiers, along with four others, a human couple and a vrusk couple, that I used sort of as test cases for all the modules. As a group of eight, I ran them through all the published modules, very much in the order that I talked about in my Module-based Campaign posts. They left CDC sooner than described (and joined it later), joined the Clarion Royal Marines, and participated in the Beyond the Frontier series. I’ve removed those references from their current form so that those adventures can be used for PCs in the game. If you don’t plan on using those adventures for the PCs, feel free to add those details back into the background of the OE crew and give them contacts and connections in those systems. They might even be local celebrities in certain parts of the Frontier.
The CDC investment came from the Mission to Alcazzar
module. That module has a table you can
roll on to see how their investment does.
It’s way too generous with only a 20% chance that something bad will
happen (90% loss or 50% loss – 10% chance each), a 20% chance there will be no
change, and the other 60% of the time the investments will multiply by 2 (20%
chance), 5 (20% chance), 10 (10% chance), or even 50 (10% chance). So if you invest the 5,000 Cr. the module allows
and let it ride for a few years, you’re probably going to have a lot of
money. I’m sure I fudged some rolls in
my early teens toward positive results.
The listed value of that “nest egg” on their character sheets is in the
hundreds of billions of credits. Each.
But given the generosity of the table, that can be achieved in just
10-15 years of random rolling which is why I spread it out over more time in
the write up. They really can buy anything
that they want if it is for sale.
In the character and ship sheets, the TSSS Dark Rose is
really the Gullwind, acquired as part of the Dramune Run module. That was the ship they started with and used
to plot the jump from Truane’s Star to Cassidine. The Searcher came later as their second ship. Also, they have never cashed out their CDC
stock. Acquiring the Gullwind for free,
plus the money saved from the other KH adventures where they were well paid,
provided enough capital to get started and they’ve done well and grown their resources. I used to play out running cargos around the
Frontier. Each ship sheet has a strip of
cellophane tape across to top with its operating budget written in wet erase
marker (dry erase wasn’t a thing). I’d
worn out the paper writing and erasing all the time that I hit on that as a solution.
I have a folder full of papers detailing the characters,
their ships, and their installations. A
lot of those probably need revising from the wild imaginations of my teenage
self and updated with a dose of realism.
There’s also a notebook containing the full plan for the FS42
system. I had originally placed their
system where Belnaefar is located on the Zeb’s Guide map but that was before I
owned a copy of Zeb’s guide. I had
placed Benaefar in the system down to the left (FS22) originally. With the move of Belnaefar, I’ve simply moved
the location of the OE system (named Sadar in my notes).
Otherwise, the outline provided is pretty true to how I originally
envisioned and ran the characters. The
only other major difference is that Reesta never really participated in the OE
endeavor other than to be a part owner, she, plus the other four from the
group, went right from the Beyond the Frontier series of adventures into
Spacefleet. They get together as often
as they can when the Morning Glory is in Cassidine and she’s not on patrol.
That’s Obar Enterprises as it currently exists in my game
and how it came to be. I’m sure there
are details or other information that I left out. Let me know what you like about the write-up
and where it could be improved in the comments below.
Just a quick note to mention a few updated I’ve made to the website. They are relatively small but important.
First, as I mentioned in my last State of the Frontier post, I have a new server. As of this post, I’ve migrated the site from the old server to the new one. This required reworking a little bit of the back-end infrastructure to get everything working. Not so much to get the site up, but rather to make it so it will be easier to add in all the other sites I want to bring to the server. Since the new server is a much faster machine, you might notice some performance improvements although this site has been fairly performant already.
The other change, and arguably the more important one, is that as part of those back-end changes, I’ve added an SSL certificate to the site and it is now accessible via HTTPS instead of HTTP. You may or may not have noticed when you accessed the site to read this post. As I bring other sites over to this new server they will be HTTPS enabled as well. This should hopefully help with the various search engines (which down rank non-HTTPS sites) and with browsers that give warnings or even block sites that are HTTP only.
That’s it for now. Now that I know the server and infrastructure are working, I’ll be moving the other websites over the course of the next few weeks. If you run into any problems or issues, be sure to let me know.
Here’s the next installment of the timeline. As always, you can get these daily as I post them on the Star Frontiers Twitter feed. This month sees the Discovery Squadron arriving at their destination, Strike Force Nova setting out to deal with the sathar presence in OFS019, and the HSS History’s Hope continuing its journey well beyond the Frontier. We also see the beginning events of one of the modules and the emergence of a new small corporation that will play a role later on.
Date (FY)
Event
60.299
Star Law agents at foil an attempt to explode a bomb at the Council of Worlds headquarters on Gran Quivera (Prenglar). The suspects claim to me members of the Anti-Satharian League but the League leaders deny their involvement.
60.300
Further investigation and interrogation of suspects
captured at the Council of Worlds bombing reveal that they are actually
members of the Free Frontiersman Foundation, a radicalized political faction
bent on overthrowing the UPF.
60.301
Sathar SCC#2 (Liberty) completes an
assault carrier
60.302
Strike Force Nova arrives back at Morgaine’s World
(Prenglar). Crews are given a week of shore leave while Spacefleet decided
how to best utilize the Strike Force given the recent discoveries.
60.303
Discovery Squadron successfully jumps
into the OFS030 system but arrive much further out than anticipated. However, the jump is considered a
success. They begin immediately
monitoring for sathar signals and plotting a jump to the OFS031 system, just
five light years away.
60.304
HSS History’s Hope arrives in OFS221. Calculations begin for jump back to
OFS224. The crew hopes that the second
attempt will be more successful than the last.
60.305
After a long investigation, the
security leak at Nesmith Enterprises of Triad is attributed to a shadowy
faction know as the Investors. Little
is known about this organization beyond that it appears to be supported by
very rich financial backers.
60.306
Calculations complete, the Discovery Squadron
begins accelerating toward their jump to the OFS031 system.
60.307
Calculations complete, the HSS
History’s hope begins accelerating for the jump back to OFS224.
60.308
The two destroyers from Patrol Group Virgo, still
stationed in the Zebulon system, are tasked by Spacefleet with a
reconnaissance mission to OFS019 and charting the return jump from OFS019 to
Kazak. The two ships depart immediately for Capella.
60.309
Crew of the Jetsom start experiencing
minor issues with the ship’s electronics (Belnafaer) (SFAD5)
60.310
– Repairs of the Streel starship construction center (Pale, Truane’s Star) completed restoring the SCC to full capacity.
– An assault scout for the TransTravel corporation is completed at the Minotaur (Theseus) starship construction center. It begins its maiden voyage headed to Terldrom (Fromeltar).
– Successfully arriving in the OFS031 system, the Discovery Squadron begins decelerating toward the inner system searching for sathar signals.
60.311
– Construction of CDC mining base on Alcazzar (Rhianna) complete, full scale operations begin. (SF4)
– The two TransTravel assault scouts arrive at Terldrom (Fromeltar).
60.312
The HSS History’s Hope successfully jumps back to
OFS224 and begins decelerating in preparation for a jump back to OFS221. Details of the full jump route are
transmitted to Spacefleet.
60.313
Strike Force Nova is ordered to the
Zebulon system while the UPF negotiates with the Rim Coalition to allow the
large fleet to traverse Rim space. The Strike Force leaves orbit around
Morgaine’s World and begins accelerating toward a jump to Dixon’s Star.
60.314
After four days in system with no detection of
sathar presence, the Discovery Squadron decides to spend an extra week in the
system before making their final jump to the OFS070 system. This will allow them to catch up on repairs
and maintenance for their ships before the final push and allow the
astrogators extra time to work on their calculations.
60.315
Having fully recovered from their trek,
the Spire Dragons team holds a final press conference on Gran Quivera to
recount and discuss the expedition and answers questions about the trip. Thousands attend to hear the details.
60.316
Sathar SCC#2 completes a destroyer
60.317
Deceleration complete and engine
overhauls finished, the HSS History’s Hope begins accelerating for jump back
to OFS221 to start the next leg of their journey.
60.318
The two UPF destroyers tasked with charting the
route from OFS019 to Kazak, now dubbed Patrol Group Flint, arrive in
Capella. The crew takes two days of
shore leave on Faire before continuing onward.
60.319
Construction of TransTravel corvette
complete at Prenglar and the new vessel begins its maiden voyage to
Fromeltar.
60.320
Obar Enterprises, a small independent freight
company successfully charts the first half of a new jump route from Cassidine
to Truane’s Star with their small tramp freighter, the TSSS Searcher.
60.321
After only a week of deliberations, the
Rim Coalition authorizes the entry of Strike Force Nova into Rim space. This will be the largest Spacefleet
presence to ever enter a Rim system.
60.322
– Repairs, maintenance, and calculations complete, the Discovery Squadron begins their final jump to the OFS070 system which was the destination of the transmission from the Glass Pyramid on Laco (Dixon’s Star) nearly a year earlier.
– Strike Force Nova arrives at Laco (Dixon’s Star). They will have a twelve-day layover before continuing on. There is some concern in the Council of Worlds about sending such a sizable portion of Spacefleet out of the Frontier.
60.323
Fourth Saurian Ark Ship is completed
and begins its shakedown cruise.
60.324
Patrol Group Flint jumps into the Osak system, they
remain near jump speed while traversing the system and plotting the jump to
Kazak.
60.325
The TSSS Searcher arrives at Pale
station over two weeks ahead of the time it would typically take to make a
run from Cassidine to Truane’s Star and begin unloading their cargo. They immediately begin looking for a cargo
and working on calculations for the direct return jump.
60.326
– Discovery Squadron successfully jumps in to the OFS070 system. Signals from sathar vessels are immediately detected upon arrival. A deceleration vector is chosen to attempt to minimize the signal reaching the inner system and work begins immediately to calculate a jump out of the system.
– Messages are dispatched via subspace radio to both the UPF and Rim Coalitions with all the jump data and news of the sathar presence.
60.327
HSS History’s Hope arrives in OFS221
without incident. Work begins on
plotting the next leg of their jump to OFS222, only 4 lightyears away. They decide to make small jumps to improve
their chances of a successful jump.
60.328
Alpha team descends to Jetsom while Beta team
returns to the Moneyspider. Their
shuttle brings the Matrix to the ship infecting the systems in the
Moneyspider and Snobol (Belnafaer) (SFAD5)
The full timeline document is starting to get pretty big. It’s up to 27 pages at the moment. We’re approaching the end of Frontier Year (FY) 60 in the timeline. Would you like to see a new document for the new year or should I just keep growing this one? Let me know in the comments.
This post should have gone up a couple of days ago but I was completely swamped over the Thanksgiving holiday. It’s a pretty busy weekend at our house with my wife running a half marathon, Thanksgiving dinner, Black Friday Christmas shopping, and buying and decorating our Christmas tree. Along with all the regular weekend stuff like grocery shopping and laundry that had to be done. There wasn’t much free time to get the blog post up. But the craziness is behind us so let’s get to it.
Looking Back
The month started with the regular Detailed Frontier Timeline post, the next of which will come tomorrow. After that I finished up the Module Based Campaign thread and wrapped up that series covering all the Knight Hawks modules. I have to admit, it feels good to wrap up a series like that.
The last two posts of the month were the UPF Battleship and Heavy Cruiser models. I’ll admit I didn’t expect to get the Heavy Cruiser done last month but it took considerably less time than I expected to create the model and so the post was ready before the end of the month.
There were some other things going on behind the scenes last month as well. First, I’ve been having some issues with my web hosting provider and made the decision to bring all my web hosting back to my home server for the time being. That said, the computer I’m using as my home server is an old laptop that is about six years old and showing its age. To that end, I used some of the Patreon money from both my Expanding Frontier Patreon and the Frontier Explorer Patreon and purchased a new computer system to serve as a new server for my websites. That computer arrived this month and I’ve been getting it configured and set up. A big Thank You to all the Patreon supporters that made this possible.
The second thing that happened was that, given November is National Novel Writing Month, I decided to participate in a reduced #NaNoWriMo challenge. The normal event is to write 50,000 words on a new project. I knew that I didn’t have time for that, so rather than do the full challenge, I set myself a goal of writing for at least 15 minutes each day working on my Star Frontiers novel. The other part of my goal was to complete at least 10,000 words by the end of the month. And also posting my daily progress on Twitter.
I ended up not writing anything the last three days of the month (see the intro paragraph about how crazy those days were). Despite that, I more than met my word count goal with a total of 12,751 words written this month bringing the total word count of the novel up to 70,243 words. I figure the story is a little more than a quarter of the way finished so expect somewhere between 200k to 250k words when the rough draft is finished. If I had been able to write those last three days, I would have most likely had just over 14,000 words based on my writing rate through the month. Despite not getting to write the last three days, I think this was a success.
Finally, I started putting my miniature model files on-line on DriveThruRPG where people can download them if they want copies. I created a 3D Models product page in my New Frontier Games account where they are being made available. I haven’t quite gotten all the models I’ve created up yet but most of them are there. All future models will appear there as well. The model files that are recreations of the old TSR miniatures are listed as free, pay-what-you-want products while the new models that I’ve created myself will typically have a price of $0.99 or $1.99.
Looking Forward
Going forward, at least for the next few months, there are going to be some changes to my postings here on the blog. I’m going to try to get a post up every week but that may not happen. I’ve been going strong for a year and a half and I don’t want to break the streak, but if I do, you’ll know why.
The main change in posting is going to occur because I’m going to be spending a lot of time working on the websites that I maintain. And there are quite a number of them. Besides this site, I also maintain the Frontier Explorer website, starfrontiers.info, starfrontiers.us, and the Star Frontiersman website. Plus a website for New Frontier Games, an old blog (Programming Space), a website for a OSR gaming magazine that hasn’t launched yet, and personal websites for myself (I’d link to that one but see below) and two of my kids.
Initially all of these sites will just be moved over to my new server. With more memory, (much) faster disks, and a (much) faster CPU, you might even see a performance improvement. For the most part, those migrations should be seamless. There will be a bit of downtime but it should be small. Once I have them all up and running as is, I intend to start making some much needed updates and improvements to many of the sites.
You shouldn’t see any major changes to this site. I’m happy with its current design and so don’t have any major plans for it. The one thing I will be doing is enabling HTTPS and installing SSL certificates on the site to allow that. That’s one of the things I’ll be learning how to set up in the next month or so. That will be happening across all my sites.
The starfrontiers.us site is going to get a major overhaul. It is still the same site written by Bill Logan back in 2006/2007 and needs some major updating. That is going to consume the majority of my spare time over the next few months as I work on it. There will also be some updates to the Frontier Explorer site to make it more mobile-friendly. I’m also going to overhaul my personal site. It’s currently configured as a blog but since I have this one, I want to make it more of a profile site that links to all the various projects I have going instead. The other sites will be much lower priority.
In addition to the website work, I also have an editing job coming down the pipe for a FrontierSpace adventure, and a job doing the index for a new RPG coming from DWD Studios. Plus I’m hoping to continue my novel writing. And it’s time to start working on the next issue of the Frontier Explorer. As you can see, I’ve got a lot going on.
What this means is that I may not have as much time for specific blog posts. Here’s what I see happening for the next few months.
The Detailed Frontier Timeline posts will continue, both here at the first of the month, and daily on the Star Frontiers Twitter feed. I’m continuing to work on that project and intend to keep it going for a long time to come.
I’m really enjoying the modeling and miniature creation. (I think I’ve mentioned that in the past). As such, that is going to be a major part of this blog going forward, at least for the foreseeable future. I’m currently working on the UPF Assault Carrier and that will get posted in December. After that, you can expect to see the sathar assault carrier, a new UPF minelayer, and then recreations of the pirate assault scout, the freighter from the Federations Ships box, and finally recreations of the six ships from the Privateers box. That should keep me busy for a while and those will probably be released one a month for a while. I don’t think I’ll get to them any faster than that. And after that, I have ideas for a whole bunch of more ships.
This State of the Frontier post will probably become the regular last Tuesday post of the month for a while instead of just being an extra post the last day of the month. In it, I’ll update you on progress on the website updates, Frontier Explorer status, and any other projects that haven’t reached completion but which I’ve been working on. It really won’t change much, just go from an extra post to a regular one. Although if I do still have a lot to write about, I’ll bump it back to its extra post status to give you more content.
That leaves me with one or two other posts each month to keep the one-a-week schedule, depending on the way the days fall in the months to come (Dec and Mar have 5 Tuesdays, Jan and Feb have 4). I don’t know what I’m going to fill those with, although I’m leaning toward fleshing out more corporations like I did with Streel a while back. If people are interested, I could also post excerpts from the novel, although most of that is really rough and subject to great change when I get to editing in the future. The other thing that might end up here is bits of a new adventure I’m planning on starting (I know I need to finish the ones I’ve already started so they may show up as well). I hope to go to a con next year and run some Star Frontiers games and need to develop the adventures for those. I’m open to suggestions here for content. If there is something you’d like to see more of, please let me know.
That’s it for now. There is a lot coming up in the next few months so I’d better get to work. Let me know if you have any questions, comments, or suggestions in the space below.