With the UPF Assault Carrier completed, it was time to tackle the Sathar Assault Carrier. This would complete all of the capital ships for both sides.
Now, way back when I started this blog, I posted the outline for a sathar assault carrier project. This is not the model that project was intended to create. When I made that project outline, I never imagined I’d be this heavy into creating miniatures. Although if I ever get around to actually doing that project, the end result might be fairly similar. One major difference, however, would be that all the surface features would be actual scale rather than selected for aesthetics as they are on this model. But that’s for some undetermined future date. Let’s look at the model I have created.
Building the Model
Like the others, for this model I’m working off the silhouette from the game counter, pictured to the right. As you can see, this ship is a bit more bulky and angular than the other sathar vessels which tend to be more bulbous and curvy.
That said, there are definitely some features that fit the typical sathar ship style. We have the long skinny engines with the spherical tip, long, extended nacelles for the engines struts, and a round head separated from the body by a skinny neck. The other features that stand out are the guns on the head of the ship and the rectangular shape of the lobes on the side of the ship. I’m going to assume that the latter are the location of the bays for the fighters.
Now, there is another reference for the sathar assault carrier in the rules. The image to the left comes from the module SFKH3: Face of the Enemy. This ship (bottom) is described as an older, obsolete, and smaller assault carrier no longer in main-line service by the sathar fleet. In the module, it has been converted by the sathar to serve as a mobile base for larger scout craft instead of fighter craft. So while I will probably model this ship at some time in the future, I won’t be using this image as a reference for the assault carrier model.
Like the UPF assault carrier, the sathar assault carrier should be significantly larger than the light cruiser but not quite as big as the heavy cruiser. That gave me a bit of a scale to shoot for when building the model. Once that scale was decided on, I used the counter to get the rough shape of the head and body of the ship.
Here’s the final model (pictured to the right). The size of the body, neck, and head are taken directly from the dimensions on the counter.
Given the positioning of the guns on the counter, I assumed there were three evenly spaced around the head. Since the stats for the Assault Carrier include a laser battery, a rocket battery, and a proton battery, I figured that wasn’t too much of a stretch.
The size and shape of the rectangular lobes around the center of the ship are based on the counter as well. The height of the lobes from the center of the ship match the profile height from the counter and the size of the rectangle that forms the outer face, along with the width where it intersects the hull match as well. What is different is the detail on the face. The counter shows one large rectangular shaped detail that I decided to break into three smaller ones on each lobe. each of these represent a fighter bay giving the assault carrier the capacity (per the rules) to hold up to a dozen fighters.
The other major difference is the engines. Instead of the single, long engine depicted on the counter, I went with pairs of smaller engines, similar to the ones used on the heavy cruiser. Unlike the heavy cruiser, which mounted the two engines in each cluster in-line with the engine strut, for the assault carrier, I chose to mount them perpendicular to the engine strut. Additionally, these engines are slightly shorter, a bit thicker, and have a bit more spacing between them than the ones on the heavy cruiser. Otherwise, they are similar to the heavy cruiser engines and modeled on those engines.
It’s not obvious from the image of the model, which is the intention, but I started using a slightly different technique when modeling this ship. For all the ships in the past, I’ve set a global level of detail for round objects that was fine enough for the larger bits of the ships to look smooth. This resulted in way more detail on small objects (like the spheres around the upper body) than was needed and caused the rendering time of the model to be really long. Starting with this model, I’ve been specifying the detail at the individual part level, allowing me finer control and reducing the rendering time significantly since I don’t have to put as much detail into the smaller pieces.
Printing
With the model done, it was time to print the miniature. As it turns out, this model is fairly massive. In fact, physically, it has more volume than any of the models I’ve created to date, even the UPF assault carrier. Here’s a picture of the sathar assault carrier along with the sathar heavy cruiser and light cruiser (and a quarter for scale).
It sits right in there between the light and heavy cruiser but it is much fatter. It ended up weighing a couple of ounces, compared the ~1 ounce for the heavy cruiser and ~1/2 ounce for the light cruiser. It actually has some heft to it. I may consider printing these slightly hollow to save weight and bring the cost down. Here’s another picture with it next to the UPF assault carrier.
As you can see, it ended up being a bit bigger even though they are supposed to be roughly the same sized ships. I probably made the sathar one a bit too big, but I like the way it turned out so I’m going to leave it be. It’s not too out of proportion to the other sathar vessels. Any downsizing I need to do will come with the next round of ships, which I’ll be designing to all be to scale with one another. However, with it being this massive, it makes sense that one of the sathar conditions for retreat in the Second Sathar War game is the loss of too many of these ships.
Up Next
That’s it for the Sathar Assault Carrier. I’ll be adding it and the UPF Assault Carrier to the Miniatures Price Table here on the site as well as uploading the model files to my 3D models page on DriveThruRPG. My Patreon supporters received the model files for both of these ships a while ago.
The next ship I’ll be tackling will be a new model for the UPF Minelayer. That may be ready by the end of the month.
Let me know what you think about the Sathar Assault Carrier in the comments below.